Disclaimer: This sheet is intended to be a convenient reference sheet; it is not intended to replace your owner’s manual. Always refer to your owner’s manual for detailed instructions of your spa’s operation and general maintenance. The sheet refers to the “Everfresh” spa care system.
GENERAL NOTES:
- Do not connect power to an empty spa.
- Always fill spa through the filter compartment.
- Always add chemicals through the filter compartment with the jet pump running.
- Always maintain clean and unobstructed filter cartridge(s). Keeping your filter cartridge(s) clean is vital for your spa to function properly. Tri X filters may be washed in a dishwasher with no detergent but still need to be periodically degreased.
AT START-UP:
- Make sure your filter cartridge(s) have been chemically cleaned.
- Close all drains and fill the spa with water through the filter compartment.
- Apply power to the spa.
- Set temperature to your liking. Test jets to make sure the system is primed.
- Test and adjust Total Alkalinity, Calcium Hardness, and pH.
- Add stain and scale control at the rate of 1 oz. per 300 gallons.
- Insert new Freshwater AG+ Silver Cartridge.
- Superchlorinate the water by adding 1 ½ teaspoons of chlorine per 250 gallons. Make sure chlorinated water circulates in each Smart Jet position where applicable.
- Allow spa to heat to desired temperature then enjoy!
WITH EACH USE:
- Add one tablespoon of Spa Shock per 250 gallons through the filter compartment before or after each use.
- Run the clean cycle after each use.
WEEKLY:
- Test and adjust pH.
- Add three tablespoons of Spa Shock per 250 gallons through the filter compartment.
- Check and clean filter cartridge(s) as needed. Use Filter Cleaner & Degreaser as needed.
TO DRAIN:
- Disconnect the spa from its power supply.
- Allow water to drain through drain valve(s). Attach hose if desired.
- Wipe down and clean spa interior with Surface Cleaner and water.
- Chemically clean filter cartridge(s) with Filter Cleaner & Degreaser.
- Close drain valve(s) and then follow start-up procedures to fill.
Again, please refer to your owner’s manual for complete instructions.